• Flowmeter Head Dimensions: 8.75"H x 3.75"W x 10.25"D
• Weight of Flowmeter Head: 5 lbs
• Bag and Outlet Diameter: 22mm (Approx. 7/8")
• Oxygen Flow Range: 3-10 LPM
• Nitrous Oxide Flow Range: 0-7 LPM
• Fail-Safe Type: Proportional
• for MS- Mobile Stand
• Note: Specify Mounting Adapter

The pc7-c has been reconfigured to fit flush into today's cabinetry and provides the same time proven precision and dependability as our standard pc-7 unit.

• On off control: Simple 1/4 turn, Establishes a 3 liter minimum 02 Flow.
• Oxygen flush: Provides rapid Flow of oxygen directly into Patient breathing circuit.
• Micrometer needle valves: Allow quick, responsive flow Adjustments. Needle valve Design prevents seat damage.
• Minimum 30% 02: Is achieved by Limiting flows to a minimum of 3 Liters for 02 and a maximum of 7 Liters for n20.
• Dual cascading flowmeter Tubes: 02 and n20 are calibrated In liters per minute.
• Oxygen fail-safe: automatically and proportionally reduces n20 in the event 02 is reduced or shut off.
• Solid gas control block: designed to eliminate internal gas leaks.
• 02 quick connect: provides connection of auxiliary resuscitation equipment.
• Nrb check valve. prevents the rebreathing of expired gases and guards against c02 build-up.
• Emergency air valve. entrains ambient air into the breathing circuit in the event flow from the machine is lost for any reason.

Includes:

• Flushmount Flowmeter, Remote Breathing Circuit, Scavenger Rubber Goods, 10ft. Mixed Gas Hose, 5ft Supply Tubings, ¼ turn shut-off vavles for O2 and N20

• Flowmeter head with standard rubber goods
• Specify Mounting Adapter (MS) or (WC)
• Includes: inhaler, tube, and bag

• Includes: head, mobile stand (height 30" - 40"), standard rubber goods.
• Also includes: inhaler, tube, and bag.

• Includes: head, tall mobile stand (height 42" -52") standard rubber goods
• Also includes: inhaler, tube and bag

• Includes: head, tall mobile stand with Scavenger rubber goods, #5013 2 cyl. yoke block, DISS Hoses (3ft.)

• Includes: head, tall mobile stand with Scavenger rubber goods, #5014 4 cyl. yoke block w/DISS Hoses-3ft.

• Includes: head & arm with standard rubber goods
• Wall arm extends controls approx 24" from wall

• Includes: head & arm with standard rubber goods

• Includes: head & arm with standard rubber goods

• Includes:Head, Cabinet, Mount Flipout, Bracket, Scavenger, Rubber Goods

• Includes: Head & Arm w/ Standard Rubber Goods

• Can be Mounted Vertically or Horizontally

• Top or Slide Mount for Remote Breathing Circuit

• Top or Slide Mount for Remote Breathing Circuit

• 5ft. Long DISS X 90º DISS (May be Ordered to Custom Lengths)

• 5ft. Long DISS X 90º DISS (May be Ordered to Custom Lengths)