Simply select the desired tooth and patient size, and you're on your way.  A powerful microprocessor  automatically chooses the exposure time, according to the type and position of the tooth, patient size, film or digital sensor; with automatic compensation for the main voltage variation.  Manual override is optional if required.
 

Long Reach Double Positioning Arm
The long reach scissors arm moves effortlessly through a wide area, yet folds
compactly when not in use.  The scissors arm allows ease of positioning and drift free stability.

Corix 70 Plus-USV
Conditions in your practice will dictate where to perform x-ray examinations. With the Corix 70 Plus-USV you can choose the option that best fits your needs

 

Features:

• 70 KVP-8mA Tube head

• Hand held digital exposure timer

• Microprocessor will automatically choose the exposure time, according to the type and position of the tooth, patient size, film or digital sensor

• Full protection against x-ray tube overheating: the microprocessor will set the minimum cooling period between exposures, thus extending the tube head life.

• One arm reach: 71 1/8"

• Fully compatible with the fastest film or a film-less digital imaging system.

The small focal spot, the beam limiting device, and the penetration power of a 70kVp radiation beam, make the best combination of technical parameters which grant sharp images with good radiographic contrast for optimal detail perception.

Features such as grid control action, and compensation of mains fluctuations, assure consistent film blackening in a wide range of operating conditions, thus granting high diagnostic quality shots.

This system comes equipped with the AutoSet  timer, offering the best flexibility of use. The AutoSet timer has a flat keyboard and is controlled  by a microprocessor. It features an anatomical selection of technique factors, programmed selections according to tooth type and patient size, manual override (plus, minus) if required, digital display of selected values, dose reduction for digital receptors, pre-settings of film sensitivity, automatic compensation of line voltage fluctuations, full protection against tube over-heating with accurate cool-down control, and X-ray cut-off with "dead-man" control switch functionality.

Features:

• 70 KVP - 7mA Tube head

• Exposure times,  from 60ms to 3.25 sec

• Compatible with traditional films as well as low radiation dose digital sensors

• Electronic timer microprocessor controlled, with flat keyboard; automatic setting of exposure time from 60ms to 3.2 sec through object programmed selection according to tooth type and patient size.

• Three arm reaches: 70", 80", 88"

• Type: Grid-Control Action
• Line Voltage: 120 VAC, 50/60Hz
• Line Current: 8 A
• High Voltage Potential: 70kVp
• Anodic Current: 7 mA
• Focal Spot: 0.8 IEC 336/1982
• Duty Cycle: 1/30
• Skin Distance: 20cm
• Circular Radiation Field: diameter 6 cm
• Coaxial connection, free rotation in horizontal plane
• Weight: 14lbs

• Wall support
• Short, medium, and long extension arms 17 3/4, 27 1/2, and 35 1/2 inches long
• Folding arm; useful reach of 55", 65", or 72 3/4" with short, medium, or long extension arm respectively

• Line voltage: 115VAC, 50/60Hz
• Microprocessor controlled functionality.
• Zero-crossing power switching
• Automatic setting of exposure time by object selection
• Manual setting of exposure time from 60 ms to 3.2s (plus or minus, 18 steps)
• Child or Adult patient selection
• "Low dose" setting for digital receptors
• Hand-switch provided with 10" coiled cord
• Automatic compensation of mains fluctuations selectable on request
• Back-up Timer
• Timer and hand-switch can be remotely mounted