Dental Service Parts

Chapman-Huffman, Inc.

Accessories

NEW - Dental Light Reflector

• Fits PELTON & CRANE LFI and LFI+
• PELTON & CRANE cross ref. # 022438
• New manufactured reflector
• Four year warranty on optics coating

NEW - Dental Light Reflector

• Fits PELTON & CRANE LFII
• PELTON & CRANE cross ref. # 3321887
• New manufactured reflector
• Four year warranty on optics coating

NEW - Dental Light Reflector

• Fits models with handles
• RITTER J STAR Light cross ref. # 148774
• RITTER K SUPER STAR Light cross ref. # 148774
• HENRY SCHEIN cross ref. # 148774
• New manufactured reflector
• Four year warranty on optics coating

Retainer Ring (For retaining lens splash shield)

• Retainer Ring (For retaining lens splash shield)

NEW - Dental Light Reflector

• Fits models without handles
• KNIGHT L cross ref. # 152615
• MARUS cross ref. # 52R412
• HENRY SCHEIN cross ref. # 52R412
• New manufactured reflector
• Four year warranty on optics coating

Lens Splash Shield

• Fits PELTON & CRANE LFI & LFI+
• Cross ref. # 006777

O-Ring Installation Tool Kit for Handpiece Couplers

• Includes two separate O-ring tools to assist when installing O-rings on KAVO MULTIFLEX couplers
• Use with Chapman-Huffman O-ring kit 95-226-00
• Stainless steel construction
• Fits Chapman-Huffman couplers: 20-075-00, 20-077-00 and 20-079-00

Lens Splash Shield

• Fits PELTON & CRANE LFII
• Two Piece set
• Cross ref. # 3321598

Lens Splash Shield - RITTER

• Fits RITTER "J" STARLITE & RITTER "K" Super STARLITE
• RITTER STYLE

Lens Splash Shield - SCHEIN / MARUS

• Fits SCHEIN/MARUS Lights
• Cross ref. # 52R430
• SCHEIN/MARUS STYLE

Retainer Ring (For retaining lens splash shield)

• Fits RITTER, SCHEIN, AND MARUS older lights for retaining lens splash shield

Lens Splash Shield

• Fits HEALTHCO Aristocrat Light

Lens Splash Shield

• Fits BELMONT Lights 046, 047, 048 and 049

Mechanical Spring Unit Mount Assembly

• Fits PELTON & CRANE LFII unit mount lights and LFWII Wall Mount Light
• PELTON & CRANE cross ref. # 94 39 738

Mechanical Spring Ceiling Mount Assembly

• Fits PELTON & CRANE ceiling mount lights LFCII, LFCII-D, LFTII, LFTII-D and LFWII Wall mount lights
• PELTON & CRANE cross ref. # 15 32 907

Gas Spring Adjustment Tool

• Fits PELTON & CRANE LFII lights
• 5/16 hex
• Used to assist in removal of gas spring or its adjustment
• PELTON & CRANE cross ref. # 016749

Screw Kit

• Fits PELTON & CRANE LFII Unit and Ceiling mount light arms
• Four 10-24 x 1/2 fl at head socket cap screws
• PELTON & CRANE cross ref. # 017668

10-24 Flat Head Socket Cap Screw - Black

• PELTON & CRANE Cross Ref. # 090721
• 10-24 X 3/8
• Fits PELTON & CRANE LFII and LFCII-D light arms

10-24 Flat Head Socket Cap Screw - Black

• PELTON & CRANE Cross Ref. # 33 23 115
• 10-24 X 1/2
• Fits PELTON & CRANE LFII and LFCII-D light arms

10-24 Flat Head Socket Cap Screw - Black

• PELTON & CRANE Cross Ref. # 33 24 170
• 10-24 X 3/4
• Fits PELTON & CRANE LFII and LFCII-D light arms

Arm Adapter Kit

• Fits PELTON & CRANE units LFII, LFCII & LFCII-D, rear arm to front arm assembly
• Not painted, Aluminum construction
• Includes (2) set screws
• PELTON & CRANE cross ref. #'s:
  • (Old) HB4-014530
  • (New) 33 22 620

Snubbing Pin Kit

• Fits PELTON & CRANE LFII, LFCII & LFCII-D, Lights

Snubbing Pin

• Fits PELTON & CRANE LFII, LFCII & LFCII-D, Lights
• Nickel plated steel construction
• PELTON & CRANE cross ref. # 33 22 992/016705

Wave Washer

• Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights
• PELTON & CRANE cross ref. # 33 23 008/017186

Flat Washer

• Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights
• PELTON & CRANE cross ref. # 33 23 016/016189

Knuckle Hinge Screw

• Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights
• PELTON & CRANE cross ref. # 33 23 073

Reflector Pivot Bushing

• Fits PELTON & CRANE LFII light yoke and frame assembly
• Plastic construction
• PELTON & CRANE Old cross ref. # 014901 (Pkg 1)
• PELTON & CRANE New cross ref. # 023940 (Pkg 2)
• Pkg of 2

Drift Screw Kit

• Fits PELTON & CRANE LF & LF + series lights
• PELTON & CRANE cross ref. # 006804

Handpiece Oil Collector and Muffler Assembly

• Oil collector and muffler assembly for one to three handpieces
• Compact size jar 1 3/8" diameter X 1 1/4" long
• Filter element is a common gauze found in the dental office
• Minimum back pressure
• Can mount through unit base plate so jar can be removed for cleaning and filter element replacement
• ADEC cross ref. # 24.0410.00

Swivel Coupler

• KAVO Style Handpiece Coupler
• 4 hole standard Non-Fiber Optic Swivel Coupler
• KAVO cross ref. # 457/553-1210

Swivel Coupler

• KAVO Style Handpiece Coupler
• 5 hole Fiber Optic Standard Swivel
• Used with a fiber optic tubing having a fiber optic bundle to convey light to the Coupler and Handpiece
• KAVO cross ref. # 1390/553-1390

Swivel Coupler

• KAVO Style Handpiece Coupler
• 6-Pin Bulb in Coupler Style Swivel
• Bulb included with Coupler
• Fits Chapman-Huffman 6-Pin tubings and others
• KAVO cross ref. # 465LRN/553-1550

Waste Drop 4 Inch

• This 4" diameter stainless steel waste drop fits through a 4 1/8" hole in the counter top. This is a nice transition piece between the counter top and waste basket below. The waste drop can be easily removed for cleaning.
• Stainless steel construction

Waste Drop 6 Inch

• This 6" diameter stainless steel waste drop fits through a 6 1/8" hole in the counter top. This is a nice transition piece between the counter top and waste basket below. The waste drop can be easily removed for cleaning.
• Stainless steel construction

Cup Filler Assembly

• Fits 5 oz. cup
• Two inch post mounting
• Push and release water on-off filler tube
• Filler tube rests out of the way of cup rim
• 12 ft. supply tubing

Chemiclave Replacement Door Gasket

• Fits HARVEY MDT 4000, 5000, "E" & Aquaclave 10
• MDT cross ref. # 250007801

Chemiclave Replacement Door Gasket

• Fits MDT Chemiclave 5500, EM5500, 7000 and Aquaclave 20
• MDT cross ref. # 280000301

Chemiclave/Aquaclave Replacement Door Gasket

• Fits HARVEY/MDT Chemiclave 6000, 8000 and Aquaclave 30
• Cross ref. # 260006701

Door Gasket - 1730

• Fits TUTTNAUER Autoclave model # 1730
• TUTTNAUER cross ref. # 02610020
• Manufactured by Chapman-Huffman to fit TUTTNAUER Autoclave

Door Gasket - 2340

• Fits TUTTNAUER Autoclave model # 2340 units with serial # 8806 and higher
• TUTTNAUER cross ref. # 02610118
• Manufactured by Chapman-Huffman to fit TUTTNAUER Autoclave

Door Gasket - 2540

• Fits TUTTNAUER Autoclave model # 2540
• TUTTNAUER cross ref. # 02610023
• Manufactured by Chapman-Huffman to fit TUTTNAUER Autoclave

Door Gasket - 3850/3870

• Fits TUTTNAUER Autoclave models # 3850 and #3870
• TUTTNAUER cross ref. # 02610019

Door Gasket

• Fits ADEC and W&H LISA MB17 Sterilizer
• Black silicone
• ADEC cross ref. # 54.0014.00

Door Gasket - OCM/GN

• Fits PELTON & CRANE OCM Sterilizer
• PELTON & CRANE cross ref. # 004014

Door Gasket OCR/OCR+

• Fits PELTON & CRANE OCR Sterilizer
• PELTON & CRANE cross ref. # 004341

Cassette Seal Kit - STATIM 2000

• Fits SCICAN STATIM 2000 Cassette autoclave
• Kit includes installation instructions and bottle of lube
• SCICAN cross ref. # 01.100028S

Cassette Seal Kit - STATIM 5000

• Fits SCICAN STATIM 5000 Cassette autoclave
• Kit includes installation instructions and bottle of lube
• SCICAN cross ref. # 01.101649S

Door Gasket - M7

• Fits MIDMARK M7 Autoclave
• MIDMARK cross ref. # 002.0243.00

Door Gasket - M9

• Fits MIDMARK M9 Autoclave
• MIDMARK cross ref. # 053.0366.00

Door Dam - M9

• Fits MIDMARK M9 Autoclave
• MIDMARK cross ref. # 053.0903.00

Door Gasket - M11

• Fits MIDMARK M11 Autoclave
• MIDMARK cross ref. # 53.0527.00

Door Dam - M11

• Fits MIDMARK M11 Autoclave
• MIDMARK cross ref. # 053.0904.00

Air Filter

• Fits PELTON & CRANE Hustler I & II
• Cross ref. # C42-005127

Saliva Ejector Valve Cleaning Brush

• 1/2" diameter brush
• Nylon wire twisted brush
• Package of 5

Vacuum Valve Cleaning Brush

• 3/4" diameter brush
• Nylon wire twisted brush
• Package of 5

Surgical Tip Cleaning Brush

• 3/16" diameter brush
• Nylon wire twisted brush
• Package of 5

Right Angle Air Chuck

• For pressurizing valve core type filler stems
• Brass construction
• 1/4" FPT

Air Blowgun

• Lever operated
• 1/4 FPT inlet
• 125 PSI working pressure
• Standard safety tip (venturi holes increase air volume and allow air to escape if nozzle is dead-ended)
• Maximum of 30 PSI outlet pressure
• Conforms to OSHA standards

Air Blowgun With Tubing - Neon Green

• Same features as Blowgun 20-125-00 plus 10 ft. coiled hose with 1/4 MPT, 360° swivel fitting both ends

Air Blowgun With Tubing - Gray

• Same features as Blowgun 20-125-00 plus 10 ft. coiled hose with 1/4 MPT, 360° swivel fitting both ends

Coiled 10' Tubing w/ Fittings - Neon Green

• Fits Blowgun 20-125-00 with 1/4 MPT, 360° swivel fitting both ends

Coiled 10' Tubing w/ Fittings - - Gray

• Fits Blowgun 20-125-00 with 1/4 MPT, 360° swivel fitting both ends

Air Compressor Supply Hose Assembly - 3 ft. Assembly

• For new and existing compressor installation between air compressor and building supply line
• Flexible 1/2 ID, 250 PSI blue high pressure air hose
• 1/2" MPT swivel couplings both ends

Air Compressor Supply Hose Assembly - 6 ft. Assembly

• For new and existing compressor installation between air compressor and building supply line
• Flexible 1/2 ID, 250 PSI blue high pressure air hose
• 1/2" MPT swivel couplings both ends

Air Compressor Tank Drain - 120 Volt Model

• Drains moisture buildup in air compressor tank
• Fully automatic
• Adjustable drain open time from 1 sec. to 500 sec.
• Purges every time compressor cycles
• Unit is off when compressor is off
• Valve will not foul with oil like other drain systems
• Electrical source from pressure switch
• Includes service valve, screen and installation kit
• All metal construction
• Used on dental compressors with cycles of 80-175 PSI

Air Compressor Tank Drain - 240 Volt Model

• Drains moisture buildup in air compressor tank
• Fully automatic
• Adjustable drain open time from 1 sec. to 500 sec.
• Purges every time compressor cycles
• Unit is off when compressor is off
• Valve will not foul with oil like other drain systems
• Electrical source from pressure switch
• Includes service valve, screen and installation kit
• All metal construction
• Used on dental compressors with cycles of 80-175 PSI

Statim 2000 Type Compressor

• 115 VAC 50/60 Hz 0.28A
• 2.84 psig
• Statim 2000 cross ref. # 01-100560S
• Also fits PELTON & CRANE Delta 8 & Delta 10 Autoclave

Water Bottle Pick-Up Tubes 750 ml Bottle

• Pkg. of 6

Water Bottle Pick-Up Tubes Large Bottle

• Pkg. of 6

Auxiliary Clean Water Supply System - Assy. w/ 750 ml Bottle

• For antiseptic coolant or water
• Easy to install with installation instructions
• L bracket mounts to any flat vertical surface. Order 50-030-00 2" Post Mount Kit for mounting to post
• On-off air supply toggle valve, with tubing
• Regulator, preset at factory
• Water pressure gauge
• Heavy Duty Plastic Bottle is not autoclavable
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Auxiliary Clean Water Supply System - Assy. w/ Large Capacity Bottle

• For antiseptic coolant or water
• Easy to install with installation instructions
• L bracket mounts to any flat vertical surface. Order 50-030-00 2" Post Mount Kit for mounting to post
• On-off air supply toggle valve, with tubing
• Regulator, preset at factory
• Water pressure gauge
• Heavy Duty Plastic Bottle is not autoclavable
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Heavy Duty Plastic Bottle - 750 ml

• For use with Auxiliary Clean Water Supply System
• Do not exceed 50 PSI air pressure to these products
• High Density Polyethylene (HDPE) construction, translucent for checking fluid level
• Bottle material contains no latex
• Compatible with coolant liquids used in dentistry
• Heavy wall construction, safely operated at normal dental water system pressure
• Large capacity bottle includes pick-up tube
• This bottle is not autoclavable

Heavy Duty Plastic Bottle - Large Capacity Approximately 2 Lit

• For use with Auxiliary Clean Water Supply System
• Do not exceed 50 PSI air pressure to these products
• High Density Polyethylene (HDPE) construction, translucent for checking fluid level
• Bottle material contains no latex
• Compatible with coolant liquids used in dentistry
• Heavy wall construction, safely operated at normal dental water system pressure
• Large capacity bottle includes pick-up tube
• This bottle is not autoclavable

Gasket

• Replacement Gasket for Clean Water Supply Systems

Auxiliary Clean Water Supply System - Assy. w/ Bottle Water/Air

• For antiseptic coolant or water
• Easy to install with installation instructions
• L bracket mounts to any flat vertical surface. Order 50-030-00 2" Post Mount Kit for mounting to post
• On-off air supply toggle valve, with tubing
• Regulator, preset at factory
• Two position routing valve allowing use of bottled water/air purge or bottled water/city water
• Water pressure gauge
• Heavy Duty Plastic Bottle is not autoclavable
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Auxiliary Clean Water Supply System - Assy. w/ Bottle Water/Air

• For antiseptic coolant or water
• Easy to install with installation instructions
• L bracket mounts to any flat vertical surface. Order 50-030-00 2" Post Mount Kit for mounting to post
• On-off air supply toggle valve, with tubing
• Regulator, preset at factory
• Two position routing valve allowing use of bottled water/air purge or bottled water/city water
• Water pressure gauge
• Heavy Duty Plastic Bottle is not autoclavable
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Heavy Duty Plastic Bottle - 750 ml

• For use with Auxiliary Clean Water Supply System
• Do not exceed 50 PSI air pressure to these products
• High Density Polyethylene (HDPE) construction, translucent for checking fluid level
• Bottle material contains no latex
• Compatible with coolant liquids used in dentistry
• Heavy wall construction, safely operated at normal dental water system pressure
• This bottle is not autoclavable

Heavy Duty Plastic Bottle - Large Capacity Approximately 2 Lit

• For use with Auxiliary Clean Water Supply System
• Do not exceed 50 PSI air pressure to these products
• High Density Polyethylene (HDPE) construction, translucent for checking fluid level
• Bottle material contains no latex
• Compatible with coolant liquids used in dentistry
• Heavy wall construction, safely operated at normal dental water system pressure
• This bottle is not autoclavable

Gasket

• Replacement Gasket for Clean Water Supply Systems

Auxiliary Clean Water Supply System - Assy. w/ Bottled Water/Cit

• For antiseptic coolant or water
• Easy to install with installation instructions
• L bracket mounts to any flat vertical surface. Order 50-030-00 2" Post Mount Kit for mounting to post
• On-off air supply toggle valve, with tubing
• Regulator, preset at factory
• Two position routing valve allowing use of bottled water/air purge or bottled water/city water
• Water pressure gauge
• Heavy Duty Plastic Bottle is not autoclavable
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Auxiliary Clean Water Supply System - Assy. w/ Bottle Water/City

• For antiseptic coolant or water
• Easy to install with installation instructions
• L bracket mounts to any flat vertical surface. Order 50-030-00 2" Post Mount Kit for mounting to post
• On-off air supply toggle valve, with tubing
• Regulator, preset at factory
• Two position routing valve allowing use of bottled water/air purge or bottled water/city water
• Water pressure gauge
• Heavy Duty Plastic Bottle is not autoclavable
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Dual Water Bottle Supply System - Post Mount

• If your doctor is asking for more water capacity, but the assistant has a hard time holding and threading a large bottle full of water onto the existing clean water system, this dual system will solve both of their needs.
• This clean water system utilizes two 750 ml heavy duty HDPE bottles that operate independently of each other with toggle control valves. One bottle may be pressurized and in service while the other bottle is removed for cleaning or refilling, with pressure gauge reading bottle in use. This system also provides plumbing to facilitate use of an air purge, with the selector toggle to switch from bottled water to air purge or vice versa.
• Asepsis Housing for easy cleaning
• Sterling color
• Includes mounting hardware, supply tubing and installation instructions
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Dual Water Bottle Supply System - Wall Mount

• If your doctor is asking for more water capacity, but the assistant has a hard time holding and threading a large bottle full of water onto the existing clean water system, this dual system will solve both of their needs.
• This clean water system utilizes two 750 ml heavy duty HDPE bottles that operate independently of each other with toggle control valves. One bottle may be pressurized and in service while the other bottle is removed for cleaning or refilling, with pressure gauge reading bottle in use. This system also provides plumbing to facilitate use of an air purge, with the selector toggle to switch from bottled water to air purge or vice versa.
• Asepsis Housing for easy cleaning
• Sterling color
• Includes mounting hardware, supply tubing and installation instructions
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Dual Water Bottle Supply System - Under the Counter Mount

• If your doctor is asking for more water capacity, but the assistant has a hard time holding and threading a large bottle full of water onto the existing clean water system, this dual system will solve both of their needs.
• This clean water system utilizes two 750 ml heavy duty HDPE bottles that operate independently of each other with toggle control valves. One bottle may be pressurized and in service while the other bottle is removed for cleaning or refilling, with pressure gauge reading bottle in use. This system also provides plumbing to facilitate use of an air purge, with the selector toggle to switch from bottled water to air purge or vice versa.
• Asepsis Housing for easy cleaning
• Sterling color
• Includes mounting hardware, supply tubing and installation instructions
• IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS.

Heavy Duty Plastic Bottle - 750 ml

• For use with Auxiliary Clean Water Supply System
• Do not exceed 50 PSI air pressure to these products
• High Density Polyethylene (HDPE) construction, translucent for checking fluid level
• Bottle material contains no latex
• Compatible with coolant liquids used in dentistry
• Heavy wall construction, safely operated at normal dental water system pressure
• This bottle is not autoclavable

Heavy Duty Plastic Bottle - Large Capacity Approximately 2 Lit

• For use with Auxiliary Clean Water Supply System
• Do not exceed 50 PSI air pressure to these products
• High Density Polyethylene (HDPE) construction, translucent for checking fluid level
• Bottle material contains no latex
• Compatible with coolant liquids used in dentistry
• Heavy wall construction, safely operated at normal dental water system pressure
• This bottle is not autoclavable

Universal Post Mount Assembly - Surf

• For mounting vacuum canisters 30-012-00 or 30-013-00 and auxiliary clean water system 50-100-00 or 50-120-00 on a 2" dia. post
• (2) 6-32 threaded mounting holes
• Includes mounting screws
• Surf finish

KAVO MULTIFLEX Coupling Type O-Ring Kit

• Fits KAVO MULTIFLEX Coupling
• Recommended to replace all (5) O-rings on coupler
• NEW KAVO cross ref. # 1005.1033 All O-rings are black
  OLD KAVO cross ref. # 9053111 (2) small O-rings were white (3) O-rings were black

MIDWEST XGT/STYLUS Type 5-Hole Coupler O-Ring Kit

• Fits MIDWEST XGT/Stylus 5-hole coupler
• MIDWEST cross ref. # 790255R
• Pkg. of 2 sets

MIDWEST XGT/STYLUS Type 6-Hole Coupler O-Ring Kit

• Fits MIDWEST XGT/Stylus 6-hole coupler
• MIDWEST cross ref. # 790256
• Pkg. of 2 sets

Swivel O-Ring Kit

• Fits STAR 430 SWL handpiece swivel
• Fits TITAN S/SW Sonic Scaler Swivels
• Autoclavable
• Green color
• Fits all two, three and four line swivels
• Package contains two large and two small O-rings
• STAR cross ref. # 59884

NSK and SCHEIN MASTER Q.D. Type O-Ring Kit

• Fits both NSK and SCHEIN master Q D handpiece swivel couplers

CAVITRON Type Insert O-Ring Kit

• Fits CAVITRON Jet nozzle, Slimline, P Style, CAVITRON Med and Pel inserts
• Autoclavable
• Green color
• Packaged in resealable bag
• DENTSPLY cross ref. # 62605
• Pkg. of 12

CAVITRON Type Insert O-Ring Kit

• Fits FSI, FSI-SLI AND TFI inserts
• Autoclavable
• Black color
• DENTSPLY cross ref. # 62351
• Pkg. of 12
• Note: Vibration from dental handpiece turbines is absorbed by O-rings or quad rings. These O-rings and quad rings eventually breakdown, making the turbine sound like it has worn or defective bearings. By replacing these O-rings or quad rings, the turbine may sound normal again, this may also extend the life of the bearing.

KAVO Style Air or Electric Motor O-Ring

• Fits the following KAVO handpieces
  • 181H Air Motor requires (3)
  • 181L Air Motor requires (3)
  • KL700 Electric Motor requires (4)
  • 196 Series Electric Motor requires (4)
• KAVO cross ref. # 0200.6120
• Pkg of 1

Handpiece Turbine Replacement O-Rings - MIDWEST Quiet-Air

• For use in dental handpiece turbines
• Autoclavable
• Pkg. of 2

Handpiece Turbine Replacement O-Rings - STAR 430

• For use in dental handpiece turbines
• Autoclavable
• Pkg. of 2

Handpiece Turbine Replacement O-Rings - KAVO

• For use in dental handpiece turbines
• Autoclavable
• Pkg. of 2

Handpiece Turbine Replacement O-Rings - ATHENA/CHAMPION

• For use in dental handpiece turbines
• Autoclavable
• Pkg. of 2

Handpiece Turbine Replacement Quad Rings - MIDWEST TRADITION

• For use in dental handpiece turbines
• Autoclavable
• Pkg. of 2

KAVO QUATTROCARE Type Replacement O-Rings

• Small Green O-Ring (cross ref. # 628-3998)

KAVO QUATTROCARE Type Replacement O-Rings

• Large Green O-Ring (cross ref. # 639-3977)

KAVO QUATTROCARE Type Replacement O-Rings

• Black O-Ring (cross ref. # 628-3905)

O-Ring Kit

• Consists of convenient 20 compartment tool box size case, more than 200 O-rings in 20 sizes from 3/32" OD to 1" OD
• O-rings packaged in resealable bags
• Use only Parker O-Ring Lube CHAPMAN-HUFFMAN item 20-212-00

Water Heater Manual On/Off - 110 Volt

• ADEC Style Adjustable thermostat for controlling water temperature
• Manual On/Off, 110 volt or 220 volt
• Reservoir type heater with quick recovery
• Continuous warm water to syringe and handpiece
• Compact 2” Dia. X 4” High Finished in noncorrosive nickel plating
• Hospital grade cord with right angle plug on 110 volt model only. 220 volt model comes with cord less right angle plug
• NOTE: Not recommended for use with self-contained water system due to potential damage.

Water Heater Manual On/Off 220 Volt

• ADEC Style Adjustable thermostat for controlling water temperature
• Manual On/Off, 110 volt or 220 volt
• Reservoir type heater with quick recovery
• Continuous warm water to syringe and handpiece
• Compact 2” Dia. X 4” High Finished in noncorrosive nickel plating
• Hospital grade cord with right angle plug on 110 volt model only. 220 volt model comes with cord less right angle plug
• NOTE: Not recommended for use with self-contained water system due to potential damage.

Water Heater With Air Actuated On/Off - 110 Volt

• ADEC Style Adjustable thermostat for controlling water temperature
• Air actuated On/Off, 110 volt or 220 volt
• Reservoir type heater with quick recovery
• Continuous warm water to syringe and handpiece
• Compact 2” Dia. X 4” High
• Finished in noncorrosive nickel plating
• Hospital grade cord with right angle plug on 110 volt model only. 220 volt model comes with cord less right angle plug
• NOTE: Not recommended for use with self-contained water system due to potential damage.

Water Heater With Air Actuated On/Off - 220 Volt

• ADEC Style Adjustable thermostat for controlling water temperature
• Air actuated On/Off, 110 volt or 220 volt
• Reservoir type heater with quick recovery
• Continuous warm water to syringe and handpiece
• Compact 2” Dia. X 4” High Finished in noncorrosive nickel plating
• Hospital grade cord with right angle plug on 110 volt model only. 220 volt model comes with cord less right angle plug
• NOTE: Not recommended for use with self-contained water system due to potential damage.

Round Gauge

• 0-160 PSI
• 1 5/8" diameter
• 1/8 MPT or 10-32 port
• For air or water service

Round Gauge 0-15 PSI

• 0-15 PSI (for low pressure use only)
• Larger gauge face graduations for easier reading at low pressures
• 1 5/8" diameter
• 1/8 MPT back mount
• For air or water

Panel Mount Gauge

• 0-100 PSI
• 1 5/8" diameter
• 1/8 MPT or 10-32 port
• For air or water service

Gauge Replacement Lens

• Fits Panel Mount Gauge 20-100-00
• Push in type
• Clear polyurethane construction

Rectangular Gauge

• 0-60 PSI scale
• Kg/cm² 1-4 scale
• 1/2" high X 1 3/4" wide
• Panel mount
• 10-32 port
• For air service

Air Compressor Main Gauge

• Designed for reading main tank pressure on air compressors
• 0-300 PSI range
• 1/4 MPT bottom mount
• 2 1/8 inch diameter face

Vacuum Guage

• Fits wet type vacuum pumps
• Fits the following: AIR TECHNIQUES vacuum pumps, VACSTAR 2, 20, 4, 40; Single Pumps VACSTAR 50, 50H, 80, 80H dual pumps
• 1/8 MPT back mount
• 1 5/8" inch diameter face
• 0-30 inches of mercury
• AIR TECHNIQUES cross ref. # 55616

Vacuum Gauge

• Fits wet type vacuum pumps
• Commonly used on single pumps
• 1/4 MPT bottom mount
• 2 inch diameter face
• 0-30 inches of mercury

Liquid Filled Vacuum Gauge

• When your customer has a rough running wet type vacuum pump & the extra vibration keeps destroying vacuum gauges, this is the gauge you need.
• Liquid filled
• Commonly used for single wet type vacuum pumps
• 1/4 MPT bottom mount
• 2-3/4" diameter face
• 0-30 Inches of mercury

Vacuum Gauge Assembly

• Fits DENTAL-EZ MC-201 and MC-202 Dynamic-Dual evacuation System (some modification to mounting hole needed on older models)
• Cross ref. # 6-4555-0030-30 inches of mercury
• Panel mount
• 1/4 MPT back mount

Brake Cable Assembly

• Fits ADEC Priority 1005 Chair.
• ADEC cross reference #61.0025.00.
• Includes cable assembly and nut.

Cassette Carriage Cable Assembly

• Fits S.S. White panorex cassette carriage
• Includes (3) cable assembly screws

Cassette Carriage Cable Screw

• Fits S.S. White Panorex cassette carriage cable
• Pkg of 12

Cavitron Handpiece Sleeve Assembly

• Using this sleeve on a CAVITRON handpiece will allow it to hang in universal holders 25-015-00 or 25-016-00 and others

Armrest Stop Screw

• Stainless steel construction
• Fits DENTAL-EZ JS and VS chairs
• DENTAL-EZ cross ref. # 3800-112

Storage Racks with Organizers

• Four storage tubs and racks with mounting brackets
• Designed for mounting to cart, cabinet or wall
• Perfect for custom mounting
• White plastic tubs with hinged lids
• Each tub comes with one vertical divider and one half-divider for depth adjustment
• Two position, horizontal and 30° tilt for convenient access
• Mounting surface is 6 1/2" X 21"

Storage Tub with Dividers

• Fits single rack (60-402-00)
• Tub measures (outside) 5 1/4"L X 4 1/4"W X 5 3/4"H inside 4 3/4" deep
• Includes one half and one full divider
• White plastic tub, hinged cover and dividers

Single Rack

• Fits storage tub (60-405-00) and single rack mounting bracket (60-403-00)
• Nonslip feet
• Color white
• 5 1/4" W X 6 1/2" D

Single Rack Mounting Bracket

• For mounting single rack (60-402-00) to cart, cabinet or wall
• Color white

Storage Tub Dividers - Full (3 13/16 X 4 3/4)

• Fits 60-405-00 storage tub
• White plastic

Storage Tub Dividers - Half (2 1/4 X 3 7/8)

• Fits 60-405-00 storage tub
• White plastic

Storage Tub Cover - White Cover

• Fits 60-405-00 storage tub
• Plastic construction
• Note: Order hinges (60-406-00) separately

Storage Tub Cover - Clear Cover

• Fits 60-405-00 storage tub
• Plastic construction
• Note: Order hinges (60-406-00) separately

Tub Hinge - White Hinge Only

• Tub Hinge - White Hinge Only