Features:

• 9.5mm Light Probe
• Eye Protector
• High output light intensity of 500-550W/cm2
• Timer Memorial Function
• Built with 20sec, 40sec, 60sec and 120 sec internal timer and beeper
• 10 second beeper reminder
• Accurate built-in radiometer
• Selective Colors of Blue, Purple & Green
• Philip Halogen Light Bulb -12v/75w
• Dimension: 25cm x 12.5cm x 21.5cm

Accessories:

• Handle
• Power Cord
• Eye Protector
• 9.5 mm Light Guide/Probe

Warranty Terms:

• 18 month limited warranty on the internal PC board and electrical components
• 1 year limited warranty on the power adaptor, etc.
• 120 days on light guide fiber, light bulb

L2 Curing Light

Features:

• Equipped with a power adaptor input of 100-240 VAC
• 50-60Hz, 0.6A; output of 5.0 VDC, 3.0 A
• 15 W Max for battery charging.
• Built in battery is a Li-on type with 3.6 V-DC and a capacity of 700MAh.
• Estimated battery charging time is at least 2 hours; when fully charged, battery has a capacity of approximately 180 ten second cures.
• This system can be used either plugged with cord, or cordless after fully charged.
• It has the optical wavelength of 430-470nm, with flux intensity of 1,000 W/cm2.
• LED power consumption is 3 watts.
• Unit is made with double layer of LED lens for optimal wavelength.
• With push of the button, it also includes a timer setting of 10 or 20 seconds
• 3 varieties of modes: Fast, Ramp and Pulse, with each mode giving the user the options to choose the appropriate operation mode.
• Stand up battery charging cradle (as pictured) is included.
• Comes with rechargeable base

Warranty Terms:

• 18 month limited warranty on the internal PC board and electrical components
• 1 year limited warranty on the power adaptor, and base charger
• 120 days on light guide fiber, internal battery, LED bulb

L3 Curing Light

The ART-L3 PRO (3 WATTS) LED CORDLESS CURING LIGHT SYSTEM is equipped with a power adaptor input of 100-240 VAC, 50-60Hz, 0.6A; output of 5.0 VDC, 3.0 A, 15 W Max.

• It includes 1 glass type light guide fiber for better curing of composites in seconds.
• It has the optical wavelength of 460-470nm, with flux intensity of 1,000 W/cm2.
• LED power consumption is 3 watts.
• Unit is made with double layer of LED lens for optimal wavelength.
• With push of the button, it also includes a timer setting of 10 or 20 seconds and 3 varieties of modes: Fast, Ramp and Pulse, with each mode giving the user the options to choose the appropriate operation mode.
• F mode starts the unit on full power for the duration of the cure time set.
• R mode gradually ramps the power up to full over 2 seconds, and then continues at full power for the remainder of the cure time set.
• P pulses the light at full power for a second with a rest of 0.2 seconds for the duration of the cure time set.

ISO certified; 510k registered!

Warranty Terms:

• 18 month limited warranty on the internal PC board and electrical components
• 1 year limited warranty on the power adaptor and base charger
• 120 days on light guide fiber, internal battery and LED bulb

L3 Pro Curing Light

ART-L5 Cordless curing light

The ART-L5 is ergonomically designed with a gun-shaped handle. It features 3 curing modes: Fast, Ramp, and Pulse. While the ART-L5 is a cordless device, the AC power adapter may be plugged directly into the handle allowing the ART-L5 to be used while battery power is low.

Specifications:

• Input Power:100-240VAC, 50-60Hz, 0.8A
• Output Power: 5.0VDC/ 3.0A +/-5%
• Optical Wavelength: 460~480nm
• Flux Intensity: Up to 1,400 m W/ cm2 per Minute (Highest Peak)
• 2mm Layer Cure Time: 3 to 5 seconds cure
• Glass Optic Fiber Light Guide: 7.0mm/70 degree
• LED Power Consumption: 5 Watts
• LED Estimated Life: 50,000 hours
• Battery Type: Li-ion; Voltage: 3.7V; Capacity: 2500mAH

Included Accessories:

• Light guide
• Eye shield
• Charger
• AC power adapter
• User manual

Compatible Light Guides/Tips:

• LC0007-082 (new version): 70 degree, 7.0mm
• LC0007-041: 45 degree, 7.0mm
• 510K Registered
• CE and ISO certified

L5 Curing Light