Fast polymerization
Cybird using 5W LED can significantly shorten user's operation time with its powerful light intensity.
- With 11-8mm turbo light guide: 1,500mW/Cm2
Various timer setting
Cybird has 4 types of timer setting modes for all restorations of resins, composites and bonding agents.
( 5, 10, 15 & 20 seconds modes)
Effective cooling system
The anodized aluminum housing of the handpiece prevents heat coming from LED without any fan.
(The effective cooling brings longer life span of LED)
Removable battery pack
The Lithium-ion battery pack has a long durability and also has no memory effect.
The removable battery pack offers better maintenance.
Autoclavable light guide
Cybird uses powerful 11-8mm turbo light guide for better efficiency.
The light guide also removable for sterilization.
Intelligent charger base
The light signal of the charger base indicates recharging status. When the recharging is completed,
red light turns green light. If connections between battery and charger are not correct,
the red light will be blinking.
Cybird consists of
| Curing light handpiece |
1 pcs |
Battery (Li-ion) |
1 pcs |
Light guide 11-8mm or 11-11mm |
1 pcs |
Charger base |
1 pcs |
Adapter DC6V, 2.2A |
1 pcs |
Light protectors |
2 pcs |
Technical specifications
| Light intensity |
min 1,500mW/Cm2 |
Wavelength range |
430~490nm |
Total operation time |
10 sec. x 350 times |
Time to recharge |
approx. 2 hr 30 min. |
Emission time |
5 / 10 / 15 / 20 sec. mode |
Dimensions |
- Handpiece |
155x30x23mm |
- Charger base |
120x120x85mm |
Weight |
- Handpiece |
120g with battery without light guide |
- Charger base |
190g |
- Light guide |
A type 30g (11-8mm turbo) |
Input power |
100~240V AC, 50/60Hz |
SMPS power supply |
6V DC, 2.2A |
|
