Care3 Plus

Automates Burdensome Handpiece Maintenance

Correct maintenance performed at regular intervals is a key to high performance and longer life of your handpieces. NSK designed easy-to-use Care3 Plus to facilitate handpiece maintenance at your office. Care3 Plus automatically cleans and lubricates up to 3 handpieces at one time with a touch of button. Both high speed and low speed handpieces are processed thoroughly in a single 2-minute operation cycle.

Product Features

• Economical, efficient and time-saving
• A fail-safe maintenance solution for your office
• Filtered air used to rotate handpieces for safety
• Care for Most Handpieces & All Handpiece Brands
• Disposable mist filtration system
• Solution level indicator
• Detachable door for easy cleaning of the unit
• Easy replenishment of solution tank

Care3 Plus Automatic handpiece Cleaning and Lubrication System

NSK Care3 automatically and correctly cleans and lubricates all high speed handpieces, low speed handpieces, and air motors. All day, every day, correctly every time.

The new NSK Care3 automatic handpiece cleaning and lubrication system has been developed by NSK to professionally clean and lubricate all handpieces and air motors before autoclaving. Every Care3 automatic cycle cleans and lubricates 1,2, or 3 high speed and/or low speed handpieces, plus air motors. Handpieces are simply attached to any of the three Care3 ports.

At the touch of a button (S-Short cycle for high speed handpieces, L-Long cycle for low speed handpieces and S&L-Extra Long cycle for speed reduction handpieces) each handpiece is automatically programmed for correct maintenance and lubrication. 40 seconds after the Star button is pressed all handpieces and air motors are correctly cleaned and lubricated, ready for autoclaving.

NSK Care3 automatically purges excess lubrication solution from each handpiece. Further, Care3 automatically extracts any solution vapor from the sealed cleaning chamber via a fine filter. When the chamber cover is opened, very little solution vapor is emitted. A solution indicator visually shows the level of solution remaining in the intergraded tank, and automatically warns if the solution requires replenishing. When coupled to a high pressure air connection, Care3 automatically adjusts down to the correct air pressure required for each operating cycle. (Recommended air pressure 50-85 psi)

Features:

• You can mount three handpieces at a time
• Safe and easy to use 
• Motorized E-type ports provide superior lubrication of all geared attachments
• Automatically purges excess solution from handpieces
• Automatically removes solution vapor from the chamber
• Economical, efficient and time saving
• Extends the life of handpieces
• Compact size and easily installed
• NSK Maintenance Oil does not harm other manufacturer's handpieces
• A fail-safe maintenance solution for all dental handpieces

The NSK Advantages

	Air Activation Air supply is activated by touching the “Air” key. Air flow flushes out all residual solution.
	Original Air Filter Clean air supply is a must for effective handpiece maintenance. NSK Care3 Plus comes with a highly efficient air filter that can be exchanged and installed easily wherever you desire.
	The Oil Level Indicator Oil level indicator is ideally located at the front panel of Care3 Plus unit to clearly show amount of oil in the tank.
	Easily Cleanable Care3 Plus's front cover can be completely removed for easy cleaning.
	Virtually No Mist Disposable and exchangeable filter sponge absorbs spray mist within the unit. Filter sponges come in a pack of 12.
	Power Cord with L-Shaped Plug The power cord with L-shaped plug allows easy connection of Care3 Plus to any outlet in your office or laboratory.
	Solution Tank With a full capacity of the solution tank, you can maintain up to 3,500 handpieces (S mode).To refill the tank simply unscrew the cap on top of the unit and pour in new Care3 Plus solution.
	Supports Most Handpieces from Any Handpiece Manufacturer Any NSK handpiece can be directly connected to Care3 Plus with a proper coupling. Most handpieces from other manufacturers can also be connected directly by using a relevant adapter.
	Simple to Operate Open the door and attach up to 3 handpieces to the Care3 Plus couplings.

TYPES

Website Designed & SEO by : Skynet Technologies India